-
Water intake bar screen
Product overview: It is suitable for municipal sewage treatment, industrial wastewater treatment, water pollution and other industries. It is the pollution blocking equipment in water supply and drainage engineering, generally used as fine bar screen.
Product features: The efficiency is over 98%, the structure is simple, the design is reasonable, the operation is stable, and the noise is small.
Product details -
DAF
Product overview: As a kind of solid-liquid separation equipment commonly used in sewage treatment industry, the horizontal flow dissolved air floatation machine can effectively remove the suspended solids, grease and rubber in sewage, and it is the main equipment for sewage preliminary treatment.
Product features: It can effectively remove the light flocs which are difficult to precipitate in wastewater. Large processing capacity, high efficiency, less land occupation and wide range of use. It is widely used in petroleum, chemical industry, printing and dyeing, papermaking, oil refining, leather, steel, mechanical processing, starch, food and other sewage treatment.
Product details -
Truss Type Sludge Classifier
Product overview: Truss Type Sludge Classifier adopts the reciprocating action to scrape the bottom mud to one end of the sump for discharging, which is used for scraping and collecting the sludge at the bottom of the horizontal flow sedimentation tank. One end enters the water and the other end exits the water. The bottom of the tank has a certain slope (about 8 / 1000)
Product features: The track gauge is generally about 4-25m. When the pool width is large, it can be made into a multi pool structure. The track gauge of 8m is generally single drive. When the upper part is equipped with a surface oil scraper or a foam scraper, it is very similar to the structure and function of the hyz type oil scraper and slag scraper, but the load is different.
Product details -
Center Drive Sludge Classifier
Product overview: Generally, it is used to scrape and collect the bottom mud of various circular sedimentation tanks with a diameter of less than 18m (generally, the water volume of a single tank is less than 600t / h), and it is normally the outlet water around the central sludge discharge.
Product features: The function can be expanded, such as adding torque control indicator and automatic rake lifting structure; the mud scraper adopts rubber composite structure, and the mud is completely scraped.
Product details -
Peripheral drive sludge classifier
Product overview: It is mainly used in the primary and secondary sedimentation tanks of large-scale (generally, the water volume is more than 600m3 / h, and the tank diameter is more than 20m) sewage plants.
Product features: The bottom sludge of the scraping pool (the specific gravity is generally less than 1.2 and it is not easy to harden), generally there is no scum (or foam) scraping system at the upper part, which has the function of scraping and scraping scum. The process is generally the center water inlet, the surrounding water outlet and the center mud discharge.
Product details -
Center Drive Sludge Scraper
Product overview: Similar function as Center drive sludge classifier
Product features: The working performance is better than that of peripheral drive type. Generally, the peripheral water inlet and peripheral water outlet are adopted, and the mud is sucked into the center of the pool by single or double pipes, and then discharged by the mud valve outside the pool.
Product details -
Peripheral Drive Sludge Classifier
Product overview: It is generally used in the large-scale (generally more than 500m 3 / h) sewage treatment project of the amplitude flow sedimentation tank, especially for the scraping collection and discharge of sludge at the bottom of the secondary sedimentation tank.
Product features: The static pressure sludge discharge relies on the valves at each pipe orifice to regulate the flow to the central sludge cylinder for direct discharge. Siphon sludge discharge mainly uses vacuum pump to pump vacuum for secondary siphon lifting sludge discharge.
Product details -
Vortex grit chamber
Product overview: The equipment is generally used in the front of the primary settling tank and behind the bar screen of the municipal sewage treatment plant to separate the large inorganic particles in the sewage (the diameter is generally greater than 0.5mm).
Product features: Most of them use air to lift sand. If sand pump is used to lift sand, the wear requirements are generally high. The steel tank body is suitable for small and medium-sized flow, which is applied to a single swirl grit chamber. When the gas lift sand is used, its combined structure function is similar to that of the dole grit chamber, but under the same treatment, the combined structure has small floor area and high efficiency.
Product details -
Sand water separator
Product overview: It is mainly used for further separation of sand water mixture discharged from vortex grit chamber and other equipment, and is suitable for domestic sewage treatment project.
Product features: Screw conveying, no underwater bearing, convenient maintenance, convenient maintenancehanism, convenient installation; U-groove lined with flexible wear-resistant lining plate, convenient replacement.
Product details
- Home
- About
Company profile
MYEP-Technology Oriented Enterprise
One Stop Treatment Solution for Sludge & Sewage
Enterprise spirit: Be grateful to those who support us
Enterprise mission: Be responsible for the environment
Development concept: Win by quality, expand by quantity. Customer satisfaction is our biggest pursuit, win-win cooperation is our primary goal.
Honorary qualification
The company has obtained ISO9001 quality system certification and a number of honorary qualifications
The product has obtained many related patents
Core competitiveness
Integrate the machining advantages of Yangzhou intelligent equipment science and Technology Park of Tsinghua University, and form a complete cooperation mode with the machining enterprises in the park,
So as to ensure the machining accuracy of the equipment and improve the product quality
Customer service
If you need, we can also provide you with
on-site case study services
- Product
- Screw Press Sludge Dewatering Machine
- Low Temperature Sludge Dryer
- Belt Press
- Accessory for Dewatering Machine
- Mechanical Bar Screen
- DAF & Sludge Classifier
- Product Customization
-
Screw Press Sludge Dewatering Machine
By using the principle of screw extrusion, a new kind of solid-liquid separation equipment for sludge extrusion and dehydration is realized through the strong extrusion pressure caused by the change of screw diameter and screw pitch, and the tiny gap between the moving ring and the fixed ring.
-
Pre-thickening Screw Press Sludge Dewatering Machine
The sludge dewatering machine used for direct sludge dewatering (integrated thickening and dewatering).
-
Mobile Sludge Dewatering System
According to different requirements of the wastewater treatment plants, mobile sludge dewatering system can be put aside of the sludge tank, and start the job.
-
Screw Press Sludge Thickening Machine
Main body of the Sludge thickening machine is consisted of moving rings and fixed rings, with a screw shaft inside, the equipment can run for 24 hours continuously.
-
Low Temperature Sludge Dryer
Low temperature heat pump dryer, efficient & safe
-
Low Temperature Waste Heat Sludge Dryer
Reuse the waste heat, for enery saving
-
Integrated Sludge Dewatering and Drying System
Integrated design can dry water content from 99.8% to 10%
-
Container-type Sludge Dryer
Movable box design can simplify sludge drying and reduction
-
Rotary drum thickening Belt dewatering machine
It is mainly used for the treatment of sludge without thickening in the thickener (such as the Ao process excess sludge), which depends on the rotary drum concentration and pre dehydration, that is, it has the double functions of concentration and dehydration, and the treatment capacity is higher than single dewatering.
-
Belt Thickening Sludge Dewatering Machine
It is mainly used for the treatment of sludge without concentration in the thickener (such as the AO process excess sludge), which depends on the rotary drum thickening, that is, it has both functions of thickening and dewatering, and the treatment capacity is higher than single dewatering.
-
Heavy Duty Belt Thickening Dewatering Machine
It is mainly used for the treatment of sludge without concentration in the thickener (such as the AO process excess sludge), which depends on the rotary drum concentration and pre thickening, that is, it has both functions of thickening and dewatering, and the treatment capacity is higher than single dewatering.
-
Polymer Dosing Equipment
The function of the dosing device is to dissolve the powder polymer into a solution
-
Screw Conveyor
Installed after the dewatering equipment, transfer the sludge to loading point
-
Sludge hopper
Sludge hopper is mainly used in sludge dewatering room to collect dehydrated sludge cake and store it in sludge hopper. When the sludge reaches a certain volume, the valve at the bottom of the sludge hopper is opened by control, and the sludge cake is unloaded to the truck for transportation.
-
Rotary drum filter
The drum filter is designed for small and medium-sized cities or industrial sewage treatment plants. It is a kind of equipment which can screen and remove suspended solids in water continuously and effectively. It is mainly used in sewage pretreatment or industrial screening process.
-
Rotary Drum Screen
The screen is widely used in sewage treatment projects such as urban sewage, industrial wastewater, food processing industry, paper industry, etc.
-
Tooth Rake Bar Screen
Tooth rake bar screen is an important front trash trap in wastewater treatment process.
-
Coarse Bar Screen
A kind of pre-stage trash trap in the water intake of large and medium-sized water supply and drainage projects, which is generally used for medium and coarse bar screen
-
Water intake bar screen
It is suitable for municipal sewage treatment, industrial wastewater treatment, water pollution and other industries. It is the pollution blocking equipment in water supply and drainage engineering, generally used as fine bar screen.
-
DAF
As a kind of solid-liquid separation equipment commonly used in sewage treatment industry, the horizontal flow dissolved air floatation machine can effectively remove the suspended solids, grease and rubber in sewage, and it is the main equipment for sewage preliminary treatment.
-
Truss Type Sludge Classifier
Truss Type Sludge Classifier adopts the reciprocating action to scrape the bottom mud to one end of the sump for discharging, which is used for scraping and collecting the sludge at the bottom of the horizontal flow sedimentation tank. One end enters the water and the other end exits the water. The bottom of the tank has a certain slope (about 8 / 1000)
-
Center Drive Sludge Classifier
Generally, it is used to scrape and collect the bottom mud of various circular sedimentation tanks with a diameter of less than 18m (generally, the water volume of a single tank is less than 600t / h), and it is normally the outlet water around the central sludge discharge.
-
Peripheral drive sludge classifier
It is mainly used in the primary and secondary sedimentation tanks of large-scale (generally, the water volume is more than 600m3 / h, and the tank diameter is more than 20m) sewage plants.
-
Center Drive Sludge Scraper
Similar function as Center drive sludge classifier
-
Peripheral Drive Sludge Classifier
It is generally used in the large-scale (generally more than 500m 3 / h) sewage treatment project of the amplitude flow sedimentation tank, especially for the scraping collection and discharge of sludge at the bottom of the secondary sedimentation tank.
-
Vortex grit chamber
The equipment is generally used in the front of the primary settling tank and behind the bar screen of the municipal sewage treatment plant to separate the large inorganic particles in the sewage (the diameter is generally greater than 0.5mm).
-
Sand water separator
It is mainly used for further separation of sand water mixture discharged from vortex grit chamber and other equipment, and is suitable for domestic sewage treatment project.
-
SBR Decanter
The water decanter is a necessary mechanical device for sequencing batch reactor (SBR) to treat sewage
-
Screw Compactor
Screw compactor is a supporting equipment of bar screen, which is composed of feed hopper, press screw, screw pipe, slag discharge pipe and driving device.
- Case
Engineering case
Live video
Cooperative client
- News
Company news
Keep you updated on MYEP activity
Industry News
Get to know what happened for the industry
- Contact
Contact information
Address: Huagang Road 8, Hanjiang Industrial Park, Yangzhou City#
Tel: 0514-87118848
Fax: 0514-82888446
Mailbox: myep@yzmaoyuan.com
Talent recruitment
We are a young and energetic team
Keep passion, stick to ideals and share the fruits of success
- Company profile
- Corporate culture
- Honorary qualification
- Core competitiveness
- Customer service
About
Yangzhou MaoYuan Environmental Protection Technology Co., Ltd
Address: Huagang Road 8, Hanjiang Industrial Park, Yangzhou City#
Tel: 0514-87118848
Fax: 0514-82888446
Mailbox: myep@yzmaoyuan.com
Website key words: Sludge dewatering machine, sludge dewatering, screw press sludge dewatering machine, MDS, sludge dryer, sludge drying machine, low temperature sludge dryer, heat pump dryer
Wechat QR code
