MYEP-Technology Oriented Enterprise
One Stop Treatment Solution for Sludge & Sewage
Enterprise mission: Be responsible for the environment
Development concept: Win by quality, expand by quantity. Customer satisfaction is our biggest pursuit, win-win cooperation is our primary goal.
The company has obtained ISO9001 quality system certification and a number of honorary qualifications
The product has obtained many related patents
Integrate the machining advantages of Yangzhou intelligent equipment science and Technology Park of Tsinghua University, and form a complete cooperation mode with the machining enterprises in the park,
So as to ensure the machining accuracy of the equipment and improve the product quality
If you need, we can also provide you with
on-site case study services
By using the principle of screw extrusion, a new kind of solid-liquid separation equipment for sludge extrusion and dehydration is realized through the strong extrusion pressure caused by the change of screw diameter and screw pitch, and the tiny gap between the moving ring and the fixed ring.
The sludge dewatering machine used for direct sludge dewatering (integrated thickening and dewatering).
According to different requirements of the wastewater treatment plants, mobile sludge dewatering system can be put aside of the sludge tank, and start the job.
Main body of the Sludge thickening machine is consisted of moving rings and fixed rings, with a screw shaft inside, the equipment can run for 24 hours continuously.
Low temperature heat pump dryer, efficient & safe
Reuse the waste heat, for enery saving
Integrated design can dry water content from 99.8% to 10%
Movable box design can simplify sludge drying and reduction
It is mainly used for the treatment of sludge without thickening in the thickener (such as the Ao process excess sludge), which depends on the rotary drum concentration and pre dehydration, that is, it has the double functions of concentration and dehydration, and the treatment capacity is higher than single dewatering.
It is mainly used for the treatment of sludge without concentration in the thickener (such as the AO process excess sludge), which depends on the rotary drum thickening, that is, it has both functions of thickening and dewatering, and the treatment capacity is higher than single dewatering.
It is mainly used for the treatment of sludge without concentration in the thickener (such as the AO process excess sludge), which depends on the rotary drum concentration and pre thickening, that is, it has both functions of thickening and dewatering, and the treatment capacity is higher than single dewatering.
The function of the dosing device is to dissolve the powder polymer into a solution
Installed after the dewatering equipment, transfer the sludge to loading point
Sludge hopper is mainly used in sludge dewatering room to collect dehydrated sludge cake and store it in sludge hopper. When the sludge reaches a certain volume, the valve at the bottom of the sludge hopper is opened by control, and the sludge cake is unloaded to the truck for transportation.
The drum filter is designed for small and medium-sized cities or industrial sewage treatment plants. It is a kind of equipment which can screen and remove suspended solids in water continuously and effectively. It is mainly used in sewage pretreatment or industrial screening process.
The screen is widely used in sewage treatment projects such as urban sewage, industrial wastewater, food processing industry, paper industry, etc.
Tooth rake bar screen is an important front trash trap in wastewater treatment process.
A kind of pre-stage trash trap in the water intake of large and medium-sized water supply and drainage projects, which is generally used for medium and coarse bar screen
It is suitable for municipal sewage treatment, industrial wastewater treatment, water pollution and other industries. It is the pollution blocking equipment in water supply and drainage engineering, generally used as fine bar screen.
As a kind of solid-liquid separation equipment commonly used in sewage treatment industry, the horizontal flow dissolved air floatation machine can effectively remove the suspended solids, grease and rubber in sewage, and it is the main equipment for sewage preliminary treatment.
Truss Type Sludge Classifier adopts the reciprocating action to scrape the bottom mud to one end of the sump for discharging, which is used for scraping and collecting the sludge at the bottom of the horizontal flow sedimentation tank. One end enters the water and the other end exits the water. The bottom of the tank has a certain slope (about 8 / 1000)
Generally, it is used to scrape and collect the bottom mud of various circular sedimentation tanks with a diameter of less than 18m (generally, the water volume of a single tank is less than 600t / h), and it is normally the outlet water around the central sludge discharge.
It is mainly used in the primary and secondary sedimentation tanks of large-scale (generally, the water volume is more than 600m3 / h, and the tank diameter is more than 20m) sewage plants.
Similar function as Center drive sludge classifier
It is generally used in the large-scale (generally more than 500m 3 / h) sewage treatment project of the amplitude flow sedimentation tank, especially for the scraping collection and discharge of sludge at the bottom of the secondary sedimentation tank.
The equipment is generally used in the front of the primary settling tank and behind the bar screen of the municipal sewage treatment plant to separate the large inorganic particles in the sewage (the diameter is generally greater than 0.5mm).
It is mainly used for further separation of sand water mixture discharged from vortex grit chamber and other equipment, and is suitable for domestic sewage treatment project.
The water decanter is a necessary mechanical device for sequencing batch reactor (SBR) to treat sewage
Screw compactor is a supporting equipment of bar screen, which is composed of feed hopper, press screw, screw pipe, slag discharge pipe and driving device.
Keep you updated on MYEP activity
Get to know what happened for the industry
Address: Huagang Road 8, Hanjiang Industrial Park, Yangzhou City#
Tel: 0514-87118848
Fax: 0514-82888446
Mailbox: myep@yzmaoyuan.com
We are a young and energetic team
Keep passion, stick to ideals and share the fruits of success
Your current location: Home > Sludge dewatering case > Find by Region > Taiwan
Address: Huagang Road 8, Hanjiang Industrial Park, Yangzhou City#
Tel: 0514-87118848
Fax: 0514-82888446
Mailbox: myep@yzmaoyuan.com
Website key words: Sludge dewatering machine, sludge dewatering, screw press sludge dewatering machine, MDS, sludge dryer, sludge drying machine, low temperature sludge dryer, heat pump dryer
Wechat QR code